- Home
- ยป
- Our Products
- »
- Industrial Construction Chemicals
Industrial Construction Chemicals
300 Ml Dowsil 732 RTV Sealant
Product Brochure
Brand | Dowsil |
Model Number | 732 |
Packaging Size | 300 ml |
Packaging Type | Bottle |
Tensile Strength | 2.3 MPa |
Extrusion Rate | 350 g/min |
Skin-Over Time | 7 min |
Tack-Free Time | 20 min |
Specific Gravity | 1.04 |
Dielectric Strength | 21.6 kV/mm |
Elongation at Break | 540% |
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
260 Ml Mccoy Soudal Gp Silicone Sealant
Product Brochure
Brand | Mccoy Soudal |
Packaging Size | 260 ml |
Packaging Type | Bottle |
Hardness | 17+-5 Shore A |
Curing System | Moisture Cure |
Skin Formation | Ca 7 min |
Curing Rate | Ca 2 mm/24h |
Specific Gravity | Ca 0.95 g/ml |
Features:
Good adhesive on glass
Low modular
Highly elastic
Excellent UV resistance
Mccoy Soudal Fix All Crystal Super Clear
Product Brochure
Brand | Mccoy Soudal |
Basis | MS Polymer |
Consistancy | Stable paste |
Curing System | Moisture curing |
Skin Formation | Ca. 10 min |
Hardness | 38 +- 5 Shore A |
Density | 1,04 g/ml |
Elongation at Break | 300% |
Fix ALL Crystal is a high quality, crystal clear, neutral, elastic, 1-component adhesive based on MS-Polymer.
Good resistance to water, aliphatic solvents, hydrocarbons, ketones, esters, alcohols, diluted mineral acids and alkalis and (salt) water. Poor resistance to aromatic solvents, concentrated acids and chlorinated hydrocarbons.
320 Grms Bostick No More Nails
Product Brochure
Packaging Size | 320 gms |
Brand | Bostick |
Packaging Type | Bottle |
Working Time | 10 min |
Flammability | Flashpoint - 20 DegreeC |
Specific Gravity | 1.16 g/cm3 |
Service Temperature | - 30 DegreeC to +80 DegreeC |
Solids Content | Approx. 77% |
Bostik No More Nails is a multi purpose construction adhesive. It is a general-purpose adhesive suitable for interior or exterior general construction work. Being highly water resistant, styrene safe with high initial grab. It is a very versatile product.
No More Nails is a gunnable synthetic rubber based adhesive which exhibits excellent green strength, flexibility, good temperature resistance and good slump resistance.
Dowsil 732 Rtv Sealant
Packaging Size | 300 ml |
Color | Clr,wht,blk |
Brand | Dow |
Model Number | 732 |
Packaging Type | Cartridge |
Dowsil 732 rtv food grade sealant -40°C to 232°C
1 Kg Rolgard PTFE Reinforced Grease
Product Brochure
Brand | Rolgard |
Penetration | 274 |
Water Washout Characteristics | 2.86% |
Pack Size | 1 kg |
Oil Separation | 2.176% |
Drop Point | 256degC |
Evaporation Loss | 2.56% |
Pack Type | Container |
Gear Wear Test | 0.00058 gm/1000 cycles |
The presence of PTFE in Rolgard helps propagate smoother movement between movable and interfacing parts even at high speeds and temperatures.
Fevicol SH Synthetic Resin Adhesive
Product Brochure
Brand | Fevicol |
Packaging Type | 1 kg |
Surface Of Application | Synthetic, Woodworking |
Appearance | Milky white emulsion |
Density | 1.08 gm/ml |
Viscosity | 300 poise |
pH | 6 |
Fevicol Sr 998 Synthetic Rubber Adhesive
Product Brochure
Temp. Resistance | -30 DegreeC to 96 DegreeC |
Specific Gravity | 0.88 |
Coverage by Spreader | 5.0 m2 / litre / coat |
Brand | Fevicol |
Model No | SR 998 |
Appearance | Dark Brown Liquid |
Viscosity | 25 poise |
Fevicol Sr 998 Synthetic Rubber Adhesive is a Superior Adhesive recommended to bond Galvanized Iron or Aluminium duct surface to Nitrile Rubber or Crossed Linked Polyethylene Foam to provide insulation to AC Ducts, Chilled Water Pipe Lines, and Reaction Vessels in various industrial & residential projects.
Fevicol SR 998 is a Synthetic Rubber adhesive specially developed taking into consideration the application needs & performance requirements of insulation market segments.
1 Ltr S 758 Dunlop Rubber Adhesive
Product Brochure
Brand | Dunlop |
Model Number | S758 |
Packaging Size | 1 ltr |
Packaging Type | Container |
Coverage | 4 square metres of bonded material/litre |
Flash Point | -12degC |
Viscosity | 6500 cps |
Total Solids | 26.5 + 1.5% |
Minimum Open Joint Time | 15 minutes - depending upon absorbency of materials to be bonded |
Typical Specific Gravity | 0.878 |
Alpha S.758 have been developed as multi-purpose adhesives. Both form strong, permanent contact bonds between the following materials - rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloth*, leather, polyester glass fibre, rubber sheet and extrusions all of which may be bonded to each other or to hardboard, chipboard, wood, painted or unpainted metal. Rigid laminated plastics such as Formica, Ware rite, Melamine, etc may also be fixed with these adhesives. They are both well established in the automotive and coach building industries as multi-purpose body trim adhesives. Typical body trim and coach building operations to which S.758 are suited include door and fascia trim, roof headlining, parcel racks and glove compartments.
280 Ml Dowsil Gp Silicone Sealant
Product Brochure
Brand | Dowsil |
Packaging Size | 280 ml |
Packaging Type | Bottle |
Hardness | 15 Shore A |
Tensile Strength | 0.99 MPa |
Extrusion Rate | 501.4 g/cm3 |
Applications | Window and door glass filling and sealing, Glass to glass adhesion and sealing |
Flow | <3 mm |
Tack-Free Time | 11 min |
Features & Benefits:
One-part room temperature cured silicone sealant
Good flexibility after cured
Good adhesion to glass and ceramic materials
Dr Fixit 501 Silicone Sealant
Product Brochure
Brand | Dr Fixit |
Model Number | 501 |
Packaging Size | 280 ml |
Packaging Type | Bottle |
Appearance | Clear low viscosity liquid |
Tack Free Time | 3 hrs |
Shelf Life | 12 months |
Stone | 1 - 3 m2 per litre |
Masonary | : 1 - 2 m2 per litre |
Precast Concrete | : 2 - 3 m2 per litre |
Service Temperature | 60 to +180degC |
Specific Gravity at 25C | 0.9 |
Specific Gravity | 0.9 |
Plastic Deformation | Up to 95% recovery after plastic deformation |
Skinning Time | 15 min |
Typical Applications:
- Building stone cladding
- Precast concrete structures
- Masonry
- Sealing the underside of stone tiles
} Paintable – will accept most water borne coatings.
} Single component, easy to apply.
} Clear liquid invisible after application.
} Water repellent, reduces staining and chloride and sulphate attack.
} Quick drying rapid protection.
Health and Safety
Dr. Fixit Uniseal 501 contains flammable solvent and therefore must not be exposed to naked flames or sparks. If applying in an enclosed area, provide adequate ventilation AND wear suitable breathing apparatus. Normal industrial hygiene procedures should be adhered to particularly when spraying and gloves and eye protection should be worn. In case of skin or eye contact thoroughly irrigate with water and seek medical advice if any irritation develops or persists. In case of accidental ingestion, wash mouth out with water and seek medical attention immediately. See MSDS for further information.
Wacker Wn Weatherseal Neutral Silicone Sealant
Product Brochure
Brand | Wacker |
Packaging Size | 480 ml |
Packaging Type | Bottle |
Hardness | 30 Shore A |
Extrusion Rate | 250 ml/min |
Density | 1,38 + 0,02 g/cm3 |
Cure Rate | 2 mm/day |
Elongation at Break | 500% |
Tear Strength | 4,5 N/mm |
Skin Forming Time | 10 min |
Dowsil 789 Silicone Weatherproofing Sealant
Product Brochure
Brand | Dowsil |
Model Number | 789 |
Packaging Type | Bottle |
Curing Time | 14 days |
Tear Strength | 11 kg/cm |
Ultimate Elongation | 700% |
Ultimate Tensile Strength | 16 kg/cm2 |
Durometer Hardness | 28 Shore A |
Working Time | 30 min |
Features & Benefits:
Easy of use – all temperature gunability
Primerless adhesion – upon curing will form a strong bond to most common building components without the use of a primer
Long-life reliability – cured sealant stays elastomeric from -50°C to 150°C without hardening, cracking or becoming brittle under normal weather conditions
Composition:
One-part, neutral-cure, RTV silicone sealant
Dowsil Neautral Plus Silicone Sealant
Product Brochure
Brand | Dowsil |
Packaging Size | 500 gm |
Packaging Type | Bottle |
Tensile Strength | 1.2 MPa |
Extrusion Rate | 540 g/min |
Density | 0.99 g/cm3 |
Durometer Hardness | 25 Shore A |
Flow Sag or Slump | <2 mm |
Tack-Free Time | 19 min |
In Depth Cure | 1.7 mm |
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
100 Grm Hylomar Universal Blue Gasket Jointing Compound
Product Brochure
Area Covered by 100g | 1.275 m2 |
Product Coverage After Drying | 4 mg/cm2 |
Color | Blue |
Pack Type | Box |
Pack Size | 100 g |
Brand | Hylomar |
Temperature Range | -50 to 250degC |
Surface Finish Max | 2.0 um |
Hylomar Universal Blue can be removed from dismantling components by rubbing with a cloth soaked with Acetone. No scraping is necessary.
Light grade: inlet manifolds, timing case covers, oil pump joints, gearbox and transmission components, thread sealing and any finely machined surface.Medium grade: water and oil pumps, instrument inspection covers, cylinder heads, sumps and most machined surfaces.Heavy grade: gas turbines, water cooled generators, turbo vacuum systems, gearboxes and most rough machined surfaces.
CVC-R7 Turbo Fix Cold Vulcanized Cement
Product Brochure
Form | Liquid |
Brand | Turbofix |
Theoretical coverage | 4 - 5 m2 per liter |
Brookfield Viscosity (at 25 DegreeC) | 1100 - 1300 cps |
Pack | 100 gm |
NVM Content % | 18 - 20.0 % |
Country of Origin | Made in India |
1 Ltr CVC-R7 Turbo Fix Cold Vulcanized Cement is viscous liquid of brushing viscosity. It is two component room temperature curing chloroprene based rubber adhesive that when catalysed with the appropriate amount of Hardener, yields high strength adhesion when bonding rubber to rubber ,rubber to fabric, rubber to steel, rubber to PVC, urethane, fiberglass, concrete etc. It is formulated after intense R & D efforts to address diverse application needs of the industry.
20 Kg Myk 290 Tile Jointing Adhesive
Product Brochure
Brand | MYK Laticrete |
Usage/Application | Floor and Wall |
Packaging Size | 20 kg |
Open Time | 20 min >-75 psi |
Slip Resistance | <-0.50 mm |
After Water Immersion | Less than 0.50 N/mm2 |
Sag | <-0.02" |
Pack Type | Bag |
Color | Grey |
Features:
Extended Open Time
High Bond Strength
600 Ml Boss PU25 Silicone Sealant
Product Brochure
Brand | Boss |
Model Number | PU25 |
Curing | 4 mm per 24 hours |
Shore A Hardness | 45 |
Skin Formation Time | 30 min |
Specific Gravity | 1.35 |
Consistency | Non sag thixotropic Paste |
Tooling Time | 10 min |
Elongation at Break | > 550% |
ASV 4298 Silicone Mold Release Spray
Product Brochure
Packaging Size | 500 ml |
Packaging Type | Bottle |
Brand | ASV |
Specific Gravity | Less than 1.00 gm/cc |
Flash Point | -18degC |
Temperature Range | Up to +260 DegreeC |
Model No | 4298 |
Odor | Odorless |
- High quality heavy-duty silicone prevents sticking
- Provides maximum efficiency & economy
- Fewer rejects & more production
- Excellent for high temperatures
- Improves product surface finish
- Non-staining & non-corrosive
Directions for Use:
- Shake can well before using. Hold can 10-12” from surface and spray a thin, light coating. Do not spray directly on plastics
Miracle Galva Prokote Zinc Spray
Product Brochure
Brand | Miracle |
Form | Liquid |
Packaging Type | Bottle |
Packaging Size | 500 ml |
Pigment Purity | Approx. 99.5% Aluminium |
Areas of Use | Indoors and Outdoors |
Hardened After | 12 hrs |
Dust Dry After | 15 min |
Processing Temperature | +5 DegreeC to +35 DegreeC (Ideal is 18 DegreeC-25 DegreeC) |
Specific Gravity | 1 g/cm3 |
Made from a combination of zinc and aluminium pigments, Galva Spray is fast drying and very long lasting. When subjected to a concentrated salt spray as part of a DIN EN 9228 test, parts treated with Galva Spray showed no corrosion after more than 450 hours of exposure.
ASV Shiny Galva Zinc Spray
Product Brochure
Brand | ASV |
Form | Liquid |
Packaging Type | Bottle |
Packaging Size | 500 ml |
Complete Cure | 24 hrs |
Odor | Solvent |
Purity of Zinc Used | 99.5% min |
Flash Point | -18degC |
Specific Gravity | Less than 1.00 gm/cc |
Benefits:
- Repairs damaged hot dip galvanized surfaces
- Fast air-drying and offers protection of hot dip galvanizing
- Brilliant metallic finish to that of hot dip galvanizing
- Highly abrasion resistant film does not peel off
- Offers long-term protection
- Prevents rust & corrosion
Aerol Galvasil Spray
Product Brochure
Usage/Application | Weathering, Welding, Cutting, Machining Etc |
Brand | Aerol |
Form | Liquid |
Packaging Type | Bottle |
Packaging Size | 500 ml |
Temperature Resistance | 200degC |
Coating | Zinc |
Weight | 275 gm |
1 Kg Stag B Jointing Paste
Product Brochure
Packaging Size | 1 kg |
Brand | Stag |
Packaging Type | Box |
Form | Paste |
Flash Point | 12degC |
Breakdown Voltage | 1,32,000 volts/ cm |
Volatile Content | <25% by volume |
Temperature Range | -40 to +650degC |
Specific Gravity | 2.16 |
Stag B paste is easy break, smooth consistency, lead-free jointing compound. Stag B is of thick consistency for use on surfaces made uneven by corrosion or those bearing heavy tool marks, etc. It may be used on screw-threaded joints. It is recommended for use on fittings with a diameter of 13 - 38mm. For fittings larger than 38 mm or highly coarse, it is strongly advisable to incorporate hemp (or fiber) reinforcement, suitably wetted with Stag B into the threads.
400 Ml Molykote G-Grapid Plus
Product Brochure
Brand | Molykote |
Form | Liquid/Paste |
Packaging Size | 400 ml |
Weld Load | 5300 N |
Resistance | 90 |
Pack Type | Bottle |
Service Temperature | -35 to 450degC |
Application:
- Suitable for the press-fit production of all types of machine elements, as a running-in lubricant for new machines and gears, as permanent lubrication of machine elements which are submitted to slight or intermittent movement only, as well as for drilling, sawing and thread-cutting
- Used to lubricate threaded spindles, splined shafts, tooth gearing, worm gearing, moving screws, fittings, pumps, guides on machine tools, as well as for fitting ball and roller bearings, pulleys, wheel flanges and bolts
Birkosit Dichtungskitt 1Kg
Product Brochure
Temperature Resistance | Up to 900degC |
Density | Approx 1.1 g/cm3 |
Pack Type | Container |
Pressure Resistance | Up to 250 bar |
Service Life | 10 years |
Viscosity | 25degC |
Pack Size | 1 kg |
Application areas:
Steam and gas turbines, power plants, gasworks and waterworks, oil refineries, smelting works, shipyards, paint and rubber manufacturing, chemical industry.
Storage:
Unlimited storage life is BIRKOSIT when correctly stored. Its properties are stable and it is flexible in use. The tin should be properly closed if only part of the contents is used.
Metroark 211 Compound
Product Brochure
Brand | Metroark |
Model Name/Number | 211 |
Consistency Penetrometer | 210 |
Solidification Point | -40degC |
Evaporation | 2.0 percent maximum 24 hrs at 200degC |
Apparent Density | 1.0 gms/cc |
Bleed | 0.5 percent maximum 24 hrs at 200degC |
1 Kg K-2 Pickling Paste
Product Brochure
Physical State | Paste |
Packaging Size | 1 kg |
Packaging Type | Bottle |
Temperature | 18degC-22degC |
Cold High Pressure Water | Min 140 bar |
Yield | Approx 80 m |
Model No | K-2 |
Residence Time | 120 min |
- Removal of annealing colours in the area of the welding seams and heat-affected zones.
- A clean metallic surface in the application area is obtained.
Use:
- Apply a sufficient amount of pickling paste manually with a special pickling brush to the area that is to be treated.
- Attention: Welding seams and heat-affected zones must be allowed to cool down before using the product.
- Read the packing label before use and follow the instructions.
PVC Fevicol Probond
Pack Type | Plastic Box |
Form | Paste |
Brand | Fevicol |
Model No | Probond |
Pack Size | 1 kg |
Applications | Plywood to PVC sheets/ rolls, Plywood to Acrylic sheets, PVC edge Banding, Ply board to Charcoal |
Feature | Excellent heat resistance |
- Excellent compatibility with PVC and Acrylic - Best solution for fixing Acrylic/ PVC sheets.
- Helpful for manual edge binding.
- High Strength with long & durable bonding - Good for PVC edge binding.
- Excellent Spread ability and High Coverage -Saves cost.
- Excellent heat resistance - Excellent for heat prone applications like kitchen or high temperature climatic zones.
300 Ml Anabond 666 Rtv Silicone
Product Brochure
Brand | Anabond |
Packaging Size | 300 ml |
Packaging Type | Bottle |
Hardness | 30 Shore A |
Viscosity | Non sag |
Humidity | 50% |
Hardening Speed | 3 mm/day |
Specific Gravity | 1.08 |
Skin Forming Time | 10, 25degC |
Supron Silicone Mould Release Spray
Product Brochure
Packaging Size | 500 ml |
Packaging Type | Bottle |
Brand | Superon |
Flash Point | < -40 DegreeC CC (Closed cup). |
VOC | 575 g/l |
Appearance | Aerosol |
Odour | Organic solvents |
Miracle Silicone Spray
Product Brochure
Form | Liquid |
Packaging Type | Bottle |
Packaging Size | 500 ml |
Flash Point | > 250degC |
Brand | Miracle |
Viscosity | Kinematic Viscosity <20.5 mm2/s |
Bulk Density | 0.9 kg/l |
Odour | Organic Solvents |
Fevicol Heatx Heatproof Adhesive
Brand | Fevicol |
Pack Type | Container |
Pack Size | 650 ml |
Temperature Resistance | 170degree |
Use | Furniture industry for bonding laminate to wood, PVC laminate |
Feature | Heatproof at high temperatures |
Form | Paste |
260 Ml Resibond Gp Silicone Sealant
Brand | Resibond |
Packaging Size | 260 ml |
Packaging Type | Bottle |
Curing System | 24 hrs |
Skin Formation | 20 min |
Use | For bonding & sealing glass, windows & doors, aluminium, ceramic, fibre-glassand non-oily wood |
Features | Impact Resistant |
20 Grms Flex Kwik Instant Adhesive
Brand | Flex Kwik |
Packaging Size | 20 gms |
Fixture Time | 10 sec |
Use | Plumbing, Pipe And Conduit Accessories |
Gap Fill | 0.15 mm |
Humidity | 98% |
Lap Shear Strength | 20 n/mm2 |
Mexiko GP Silicone Sealant
Brand | Mexiko |
Tensile Strength | 1.4 MPa |
Extrusion Rate | 779 g/min |
Density | 0.97 g/cm3 |
Flow Sag or Slump | < 2 mm |
Tack-Free Time | 11 min |
In Depth Cure | 1.6 mm |
Elongation at Break | 550% |
Star Gel SS Weld Cleaning Gel
Packaging Type | Bottle |
Brand | Star Gel |
Packaging Size | 1 kg |
Form | Gel |
Application | SS |
Contact Time | 30 min |
Usage | Cleaning |
Fevicol Sr 505 Synthetic Rubber Adhesive
Product Brochure
Specific Gravity | 0.860 gm/ml |
Flash Point | 0degC to 4degC |
Drying Time | 35 sec |
Brand | Fevicol |
Model No | SR-505 |
Appearance | Liquid |
Viscosity | 16 poise |
Dendrite PC 65 Adhesive
Pack Size | 500ml/1 ltr |
Viscosity | 2100 cps At 30deg+-5degC |
Solvent | Aromatic and Aliphatic solvent combination |
Base | Synthetic Rubber |
Application | Suitable for Leather, Rubber and other general purpose application |
Model No | PC-65 |
Brand | Dendrite |
Pack Type | Container |